Heavy Duty Horizontal Lathe

Technical features

Dimensions

• Length: 21.000 mm
• Width-basic machine, electric cabinet included: 6.300/9.700 mm
• Height: 4.700 mm
• Weight (without special attachments): 310 T
• Maximum swing over the bed guideways: 3.150 mm.
• Maximum swing over saddle: 2.700 mm
• Distance between centers: 12.000 mm
• Diameter of the face plate with four independent jaws: 2.700 mm
• Max. load between centers: 300 T
• Axial load on the center of the headstock: 150 T
• Radial load on the center of the headstock: 220 T
• Max. load between face plate and steady rest: 30 T
• Max. load on a single steady rest: 80 T
• Max. load supported by faceplate: 150 T
• Max. load supported only by faceplate, without any auxiliary rest: 15 T./600 mm distance from faceplate front surface

Milling head

• Spindle speed range, 4 steps: 0.5 - 120.r.p.m.
• Main motor, SIEMENS type, not included
  
  • Power: 150 Kw (max. 200 Kw)
  • Base speed: 1.500 r.p.m
  • Max. speed: 2.000 r.p.m
• Max. torque (at 5,6 r.p.m.): 10.000 daN x m

Accesories

• Set of tools for assembling operation
• Set of leveling blocks for the bed
• Steady rest roller type, 2 pieces
• Electrics and numerical control: The machine will be prepared for motors, electrics and electronics Siemens type and numerical control SIEMENS 840 D.

Other technical features

• Tailstock quill square section: 1000 x 1000 mm
• Tailstock shaft travel (automatically): 150 mm
• Quill rapid motion: 400 mm/min
• Tail stock rapid motion (2 steps): 550/2500 mm/min
• Headstock bed
  
  • Nr. of guideways: 3
  • Bed width: 1580 mm
  • Guideways width: 2 pcs. = 170 plus / 1 pc. = 180 mm
• Tool carrier bed
  
  • Nr. of guideways: 3
  • Bed width: 2070 mm
  • Guideways width: 2 pcs. = 120 plus / 1 pc. = 100 mm

View all technical features